Table of Contents
Advertisement
7. Connection of the fuel hoses to fuel pump assembly
(1) Connection of the fuel main tube
q Clean the fuel main pipe on the fuel pump assem-
bly.
w Apply the few drops of engine oil to the fuel pipe.
e Connect the new fuel hose to the fuel pipe until
clicking sounds emits from the retainer.
r Remove the checker from the quick connector.
t Ensure that the connector is connected properly
by pull the connector from the fuel pipe lightly.
(2) Connect the fuel main tube to the fuel pipe clamps in-
stalled on the fuel tank securely.
(3) Connection of the fuel return tube
q Ensure that the checker of the quick connector is
installed on the quick connector as shown.
w Clean the fuel return pipe on the fuel pump assem-
bly.
e Apply the few drops of engine oil to the fuel pipe.
r Connect the new fuel hose to the fuel pipe until
clicking sounds emits twice.
BO–87
JBO00235-00201
Pull this up
JBO00236-00202
JBO00237-00203
JBO00238-00204
JBO00239-00205
Advertisement
Table of Contents
