Daihatsu 1997 Terios J100 Service Manual page 73

EM–12
4. Remove the power steering vane pump drive belt by loos-
ening the power steering vane pump attaching bolts.
5. Remove the alternator drive belt.
6. Remove the crankshaft pulley.
NOTE:
•
Place the shift lever in the 4th gear position so as to
prevent the rotation of the crankshaft in the case of
manual transmission-equipped model.
•
On the automatic transmission vehicle, prevent the
crankshaft from being rotated by inserting a screwdriv-
er or the like into the ring gear at the rear end section
of the cylinder block.
7. Disconnect the connector of the oil pressure switch and
loosen the attaching bolt of the oil pressure switch wire
bracket.
8. Remove the timing belt cover by removing the attaching
bolts.
JEM00031-00022
JEM00032-00023
JEM00033-00024
JEM00034-00025