Table of Contents
Advertisement
Reference:
Manual adjusting method of brake shoe-to-drum clear-
ance
NOTE:
·
The illustration shows the brake at the right hand side.
The brake at the left hand side is symmetric to the
brake at the right hand side.
(1) Remove the adjusting hole plug provided on the back-
ing plate.
(2) Turn the adjusting wheel by a flat screwdriver (A) in-
serted from the adjusting hole in the direction (C) as
shown in the figure, until the brake shoe comes in con-
tact with the brake drum.
(3) Turn back the adjusting wheel in the direction (D) by
the screwdriver (A) while pushing up the adjusting
lever with the L-shaped head bar (E), until the brake
drum turns without dragging.
(4) Install the adjusting hole plug to the backing plate.
28. Adjust the working travel of the parking brake lever.
(Refer to the "Parking brake" section for adjustment.)
29. Check the brake performance with a four-wheel brake
tester.
BR–29
Adjusting hole
E
(Backing plate side)
B
A
JBR00096-00080
Advertisement
Table of Contents
