Table of Contents
Advertisement
REPLACEMENT OF FRONT DIFFERENTIAL SIDE
OIL SEAL
1. Jack up the vehicle and support it with stands. (As for the
jacking-up points and support points for safety stands,
refer to the GI section.)
2. Remove the front wheels.
3. Drain the differential oil by removing the drain plug and
gasket.
CAUTION:
•
Do not reuse the removed gasket.
4. Remove the tie rod end attaching castle nut lock clip.
5. Remove the tie rod end attaching castle nut.
6. Disconnect the tie rod end from the steering nuckle, using
the following SST.
SST:
09611-87701-000
7. Remove the lock clip of the castle nut for the lower arm.
8. Remove the castle nut for the lower arm.
9. Disconnect the lower arm from the steering nuckle, using
the following SST.
SST:
09611-87701-000
CAUTION:
•
Be sure to protect the speed sensor rotor and sensor
from damage, using a piece of cloth or the like.
10. Loosen both sides of the suspension support attaching
nuts.
CAUTION:
•
Never reuse the used nut.
11. Disconnect the front drive shaft assembly from the front
differential, using the following SST.
SST:
09648-87201-000
DF–7
JDF00015-00014
JDF00016-00015
JDF00017-00016
JDF00018-00017
JDF00019-00018
Advertisement
Table of Contents
