BRAKE MASTER CYLINDER
COMPONENTS
q
q Brake master cylinder reservoir tank
w Reservoir filler cap
e Reservoir diaphragm
r Grommet
t Brake master cylinder assembly
y Tandem master cylinder repair kit
REMOVAL
1. Disconnect the connector of the brake fluid level switch.
2. Drain the brake fluid from the master cylinder.
(Refer to the "Air bleeding" section for procedure.)
3. Disconnect the brake pipes from the master cylinder.
CAUTION:
·
If the brake fluid is spilled inadvertently over the paint-
finish surface of the vehicle or resin-made parts, imme-
diately wipe off the brake fluid and wash with fresh
water.
w
e
r
r
t
B
For conventional model only.
y
NOTE: For ABS model
BR–7
JBR00018-00015
JBR00019-00016