Table of Contents
Advertisement
2. Check
(1) Check that the inner cable of the control cable assem-
bly slides smoothly. Also, check that the control cable
assembly exhibits no damage and deformation, such
as rapture of the boot.
3. Main points of installation
(1) Install the control cable assembly.
1) Move the shift lever and transmission control shaft
lever to the ˆ range.
2) Connect the control cable (at the shift lever side) to
the floor shift assembly so that the flange section of
the collar may come at the lever side. Then, secure
the control cable with the clip.
3) Install the control cable end at the transmission
side to the transmission control shaft lever assem-
bly, while making sure that the white mark for iden-
tifying the upper side and lower side comes at the
upper side.
Tightening Torque:
6.9 - 9.8 N·m (0.7 - 1.0 kgf-m)
AT–91
Rapture of boot
JAT00279-00253
L
P
2
D N R
JAT00280-00254
Flange
section
JAT00281-00255
Vehicle upper side mark
JAT00282-00256
Advertisement
Table of Contents
