Table of Contents
Advertisement
REMOVAL
1. Remove the front and rear seats.
(Refer to the front and rear seat section.)
2. Removal of front door scuff plate
(1) Disconnect the four retainers provided under the scuff
plate by pulling them up straight.
(2) Remove the front scuff plate.
3. Removal of cowl side trim board assembly
(1) Disconnect the retainers of the cowl side trim board
from the body panel, using a clip remover or the like.
(2) Pull out the cowl side trim board assembly rearward to
disengage it from the locator.
4. Removal of rear door scuff plate assembly
(1) Remove the attaching clips of rear door scuff plate.
(2) Gradually disconnect the retainers provided under the
scuff plate by lifting them up.
(3) Remove the rear door scuff plate.
5. Removal of center pillar lower garnish
(1) Disconnect the retainers of the center pillar lower gar-
nish, using a clip remover or the like.
(2) Remove the center pillar lower garnish while lifting it
upward.
6. Removal of center pillar upper garnish
(1) Remove the front seat outer belt shoulder anchor.
(Refer to the seat belt section for the removal proce-
dure.)
(2) Disconnect the retainers of the center pillar upper gar-
nish, using a clip remover or the like.
(3) Remove the center pillar upper garnish.
7. Removal of the front floor carpet assembly and rear floor
front carpet.
(Only when necessary.)
(1) Remove the rear console box assembly and console
panel. (Refer to instrument panel section for removal.)
(2) Remove the front floor carpet assembly by removing
the attaching clip and rear floor front carpet.
BO–65
JBO00170-00145
JBO00171-00146
JBO00172-00147
JBO00173-00148
JBO00174-00149
Advertisement
Table of Contents
