Table of Contents
Advertisement
DF–10
9. Support the differential carrier, using a suitable engine
hanger, transmission jacks or the like.
10. Remove the three attaching bolts of the differential carrier
support bracket and differential carrier assembly.
(Only for front differential.)
11. Remove the differential carrier assembly by removing
three attaching bolts of the differential carrier support
bracket mount.
(Only for front differential.)
12. Remove the front axle housing cover by removing the at-
taching bolts.
(Only for front differential.)
NOTE:
•
Be sure to place a suitable container under the front
axle housing connected sections, for a large amount of
the differential oil may flow out.
13. Remove the rear axle shaft assembly. (Refer to the RS
section.)
(Only for rear differential.)
14. Remove the propeller shaft assembly. (Refer to the PR
section.)
(Only for rear differential.)
15. Loosen the attaching bolts of the differential carrier as-
sembly evenly.
(Only for rear differential.)
16. Remove the rear differential carrier assembly by removing
the attaching bolts.
(Only for rear differential.)
NOTE:
•
It should be noted that a large amount of oil may flow
out. Hence, prior to the disconnecting of the differential
carrier, place a suitable container under the connected
section between the differential and the rear axle hous-
ing.
JDF00027-00025
JDF00028-00026
JDF00029-00027
Advertisement
Table of Contents
