Table of Contents
Advertisement
11. Install and tighten the engine mounting bracket with the
mounting to the engine.
12. Sling the engine, using a chain block.
INSTALLATION OF ENGINE
1. Insert the engine to the engine compartment.
2. Joint the engine to the transmission and temporarily install
the transmission attaching bolt.
3. Place the engine to the engine mounting section of the en-
gine support number.
4. Install and tighten the engine mounting attaching bolts.
Tightening Torque:
NOTE:
•
Be very careful not to allow the engine to hit the vehicle
body and other parts.
5. Install and tighten the transmission attaching bolts with the
power train stiffener bracket.
Tightening Torque:
6. Install the starter motor and starter motor attaching bolts.
Tighten the attaching bolts to the specified torque.
Tightening Torque:
21.6 - 39.2 N·m
49.0 - 68.6 N·m
31.2 - 46.8 N·m
EM–115
JEM00493-00443
JEM00494-00444
JEM00495-00445
JEM00496-00446
JEM00497-00447
Advertisement
Table of Contents
