Table of Contents
Advertisement
CLUTCH PEDAL ADJUSTMENT
PEDAL INSTALLATION HEIGHT
Loosen the lock nut. Adjust the pedal height by turning the
adjusting bolt.
Pedal Installation Height:
Lock Nut Tightening Torque:
ADJUSTMENT OF CLUTCH PEDAL FREE
TRAVEL
1. Pull the clutch outer cable toward the vehicle front, until
the clutch release bearing hub is brought into contact with
the diaphragm spring of the clutch cover.
2. Under the condition in the step 1, turn the adjusting nut in
such a way that the gap relative to the grommet (dimen-
sion (A) in the right figure) may be adjusted to 4 - 7 mm.
3. Align the nearest groove of the adjusting nut with the pro-
trusion of the grommet, and secure it.
4. Ensure that the free travel of the clutch pedal conforms to
the specification.
Clutch pedal free travel:
175 - 180 mm
(Distance from center of
pedal pad upper surface to
dash panel)
11.8 - 27.4 N·m
(1.2 - 2.8 kgf-m)
15 - 30 mm
CL–3
Adjusting bolt
Lock nut
Pedal height
175 - 180 mm
JCL00004-00002
(A)
JCL00005-00003
Advertisement
Table of Contents
