Daihatsu 1997 Terios J100 Service Manual page 323

2. Remove the alternator pulley.
3. Remove the attaching nut of the terminal insulator.
4. Pull out the terminal insulator.
5. Remove the three rear end cover attaching nuts.
6. Remove the terminal plate attaching bolt.
7. Remove the rear end cover.
8. Remove the brush holder by removing the two attaching
bolts.
9. Remove the rectifier holder and regulator assembly at-
taching bolts.
10. Remove the regulator assembly.
11. Remove the rectifier holder.
12. Remove the rectifier end frame assembly by removing the
four attaching nuts or two bolts and two nuts.
Rear end
cover
CH–11
JCH00028-00019
Nut
Terminal
insulator
JCH00029-00020
JCH00030-00021
JCH00031-00022
JCH00032-00023