Table of Contents
Advertisement
12. Remove the radial ball bearing in combination with the
gear, using the following SST.
SST:
09306-87602-000
13. Remove the transfer output rear shaft with differential gear.
14. Remove the ring retainer of the bearing.
15. Remove the radial ball bearing with the transfer clutch
inner hub from the transfer case.
16. Drive off the slotted pin of the transfer gear shift head.
17. Remove the E ring.
18. Remove the following parts.
(1) Transfer fork shaft
(2) Compression spring
(3) Transfer control shaft washer
(4) Shaft snap ring
(5) O ring
(6) Transfer differential lock shift fork
(7) Transfer clutch outer hub
(8) Transfer gear shift head
E ring
TR–7
JTR00023-00408
JTR00024-00409
JTR00025-00410
JTR00026-00411
JTR00027-00412
Advertisement
Table of Contents
