Table of Contents
Advertisement
BO–34
21. Remove the instrument panel subassembly by removing
the attaching bolts.
If any difficulty is encountered in removing the attaching
bolt of the rear hood lock control handle attaching bracket
of the instrument panel, prior to the removal of the instru-
ment panel, remove the hood lock control handle bracket
by removing the two attaching bolts.
CAUTION:
·
Be sure to remove the two attaching bolts of passenger
side airbag, if model equipped with passenger side
airbag.
22. Remove the front ash receptacle retainer by removing the
attaching screws.
23. Remove the heater-to-register center duct subassembly
by removing the five attaching screws.
24. Removal of airbag at front passenger seat side
(Only for model equipped with front passenger seat side
airbag)
WARNING:
·
Be sure to follow the instruction mentioned in the
airbag section in the BE section of the service manual
before performing the removal of the front passenger
seat airbag.
(1) Remove the two attaching nuts of the front passenger
seat airbag assembly.
(2) Remove the front passenger seat airbag assembly
from the instrument panel by unlocking the locks pro-
vided on the airbag assembly.
25. Removal of instrument panel center register assembly by
removing the attaching screws.
JBO00086-00000
JBO00087-00076
JBO00088-00077
JBO00089-00078
JBO00090-00079
Advertisement
Table of Contents
