Table of Contents
Advertisement
(7) Connect the rubber hoses for brake booster and VSV.
(8) Connect the fuel inlet hose and return hose.
(9) Connect the water hose.
(10) Installation of engine wire
q Connect the connector of the engine wire to the fol-
lowing parts.
a. Ignition coils
b. Injectors
c. Pressure sensor
d. Throttle position sensor
e. Intake air temperature sensor
f. Idle-up VSV
g. Oxygen sensor
h. Cam angle sensor
w Install the harness clamps to each bracket.
(11) Install the timing belt.
(Refer to installation of timing belt section)
(12) Install the alternator
EM–57
JEM00233-00216
JEM00234-00217
JEM00235-00218
JEM00236-00000
JEM00237-00219
Advertisement
Table of Contents
