Daihatsu 1997 Terios J100 Service Manual page 600

RS–20
INSPECTION
Rear axle shaft housing
Check that the external appearance of the rear axle shaft
housing exhibits no major dent and scores. Also, check that
the lateral control rod attaching stud bolt exhibits no scores.
If any damage is exists, replace the damaged part with new
one.
Replace the oil seal, if necessary. (For the changing proce-
dure, refer to the RS–16.)
Coil spring
Ensure that the coil spring is free from deformation, deteriora-
tion, crack or other damage.
If any damage is exists, replace the damaged part with new
one.
Upper and under rear spring seats and rear spring bumper
Ensure that the upper and under rear spring seats and rear
spring bumper free from cracks, deterioration, aging and
other damage.
If any damage is exists, replace the damaged part with new
one.
ASSEMBLY
1. Install the rear differential carrier assembly to the rear axle
shaft housing. (Refer to the DF section.)
2. Install the breather plug oil deflector to the rear axle shaft
housing.
3. Install the brake tube to the rear axle shaft housing.
4. Install the under rear spring seat to the rear axle shaft
housing.
JRS00065-00062
JRS00066-00063
JRS00067-00064
JRS00068-00065
JRS00069-00066