Table of Contents
Advertisement
(3) Protective goggles and gloves
(4) A bag for disposal
(5) A spacious place whose radius is at least 10 meters
CAUTION:
·
Do not perform the pre-treatment for disposal for the air
bag on a windy or rainy day.
1. Disposal procedure for air bag in driver's seat (steering
wheel pad)
(1) Turn off the ignition switch. Disconnect the negative
terminal of the battery from the vehicle cable terminal.
(2) Turn off the ignition switch and wait at least for 60 sec-
onds. Remove the steering wheel pad assembly from
the steering wheel.
NOTE:
·
The steering wheel pad assembly is installed to the
steering wheel by means of TORX
(3) Disconnect the connector of the steering wheel pad
assembly from the roll connector. Disconnect the con-
nector for horn.
â
bolts.
IG [OFF]
Roll connector
Connector
for horn
BE–87
JBE00307-05148
JBE00308-05149
JBE00309-05150
JBE00310-05151
Connector
for squib
JBE00311-05152
Advertisement
Table of Contents
