Table of Contents
Advertisement
TR–10
8. Remove the following parts from the differential case.
(1) Differential side gear No. 2
(2) Differential side gear
(3) Differential pinion shafts
(4) Differential pinions
(5) Differential pinion thrust washers
INSPECTION
1. Bearings
Visually inspect the roller and roller guide surface for
seizure due to poor oil lubrication and so forth.
2. Needle roller bearings
Check the roller outer periphery of the needle roller bear-
ing for damage by scratching it by your fingernails. Also,
visually inspect the roller outer periphery for seizure due to
poor oil lubrication or use of deteriorated oil.
3. Check the fitting section (A) and spline section (B) of the
transfer output rear shaft and the spline section (C) of the
transfer output front shaft for damage or abnormal wear.
A
C
JTR00038-00508
JTR00039-00509
JTR00040-00601
JTR00041-00602
B
JTR00042-00603
Advertisement
Table of Contents
