Table of Contents
Advertisement
REMOVAL
1. Disconnect the battery ground cable terminal from the
negative terminal of the battery.
2. Remove the front seats. (Refer to the front seat section.)
3. Removal of console box assembly
(1) Remove the rear console box assembly by removing
the two attaching screws.
(2) Remove the shift lever knob from the shift lever.
(Only for manual transmission vehicle.
(3) Remove the console panel by removing the two at-
taching bolts and two clips.
4. Remove the instrument panel finish lower panel by remov-
ing the two attaching screws. Then unlock the lock on the
instrument panel finish lower panel by pulling it out while
holding the instrument panel.
5. Remove the steering column assembly.
(Refer to the SR section for more details of the removal
and installation of the column assembly.)
(1) Disconnect the steering column assembly-related con-
nectors.
(2) Remove the four attaching bolts of the steering column
assembly.
6. Remove the two attaching screws of the instrument cluster
finish panel subassembly.
7. Pull out the instrument cluster finish panel subassembly
from the instrument panel to disengage the locks provided
on the instrument cluster finish panel subassembly.
8. Remove the instrument cluster finish panel subassembly.
9. Removal of various switches
(1) Push out the various switches from the inside of the in-
strument panel.
(2) Disconnect the switches from the connector.
(3) Put the switch connectors into the inside of the instru-
ment panel.
BO–31
JBO00071-00061
JBO00072-00062
JBO00073-00063
JBO00074-00064
JBO00075-00065
Advertisement
Table of Contents
