Table of Contents
Advertisement
BO–10
7. Installation of radiator grill
(1) Ensure that the clips and retainer are installed properly. Also, ensure that no damage exists.
If any damage exists or the clip or retainer is missing, replace the clips or retainer with a new one.
(2) Install the radiator grill by connecting the retainer and four clips.
(3) Lock the clips by turning the head section of the clip, using a phillips screwdriver. (Four portions)
8. Install the under fender bracket by installing the attaching tapping screw and grommet. (Both sides)
9. Installation of front fog & turn signal lamp (Only model equipped with the front bumper guard garnish.)
(1) Connect the connectors of the wire harness to the fog lamps.
(2) Install the fog lamp with the attaching screws.
JBO00023-00000
Advertisement
Table of Contents
