G-320H Hardware And Utility Installation; Zyxel Utility Icon; Configuration Methods; Figure 5 Zyxel Utility: System Tray Icon - ZyXEL Communications ZyXEL ZyAIR G320H User Manual

Chapter 1 Getting Started
Wait for about five seconds for the ZyXEL utility to complete the mode change.
The current mode is indicated by the color of the check box, see
page 22.

1.3 G-320H Hardware and Utility Installation

Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make
hardware connections.

1.3.1 ZyXEL Utility Icon

After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the
system tray.
The ZyXEL utility system tray icon displays only when the G-320H is installed
properly.

Figure 5 ZyXEL Utility: System Tray Icon

The color of the ZyXEL utility system tray icon indicates the status of the G-320H. Refer to
the following table for details.

Table 1 ZyXEL Utility: System Tray Icon

COLOR
Red
Green
Pale Blue

1.4 Configuration Methods

To configure your G-320H, use one of the following applications:
• ZyXEL Utility (required when you want to use the G-320H as an access point)
• Wireless Zero Configuration (WZC) (the Windows XP wireless configuration tool)
22
DESCRIPTION
The G-320H is operating in wireless station mode but is not connected to a wireless
network.
The G-320H is operating in wireless station mode and connected to a wireless network.
The G-320H is operating in access point mode.
Table 1 on
G-320H User's Guide