Power Over Ethernet (Poe); Advertise Dot3-Tlv - Dell C9000 Series Reference Manual

POEAGT
ACL
ACL_AGENT
IFAGT
DIFFSERV
MACMGR
DSAGT
IFMGR
MRTM
L2AGENT
PORTMIRR
SFL_LP
SFL_CP
POEMGR

Power over Ethernet (PoE)

Use the commands in this section to configure the Power over Ethernet (PoE) feature on a C1048P port-
extender (PE). PoE is not supported on C9010 switches. To manage PoE on port-extender ports, the C1048P
uses two types of power supplies: the main internal, fixed AC power supply and an external DC power supply.
Each power supply provides 1000W, of which up to 850W is used for PoE. For information about using the
PoE stacking feature, refer to the "Power over Ethernet (PoE)" chapter in the Dell Networking OS
Configuration Guide for the C9000 Series. The following PoE commands are supported on the Dell
Networking OS.

advertise dot3-tlv

Configure the system or an interface to advertise IEEE 802.3at extended power-via-mdi.
C9000 Series
Syntax
advertise dot3-tlv power-via-mdi
To remove the advertised dot3–tlv, use the no advertise dot3–tlv power-via-
mdi command
54 1 0 0
57 1 0 0
58 1 0 0
71 1 0 0
90 1 0 0
96 1 0 0
108 1 0 0
138 1 0 0
139 1 0 0
144 1 0 0
191 1 0 0
194 1 0 0
195 1 0 0
251 1 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
Port Extenders (PE) 1748