Configure Snmpv3 Add Access - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add access

configure snmpv3 add access [hex <hex value> | <group name>] {sec-model
[snmpv1 | snmpv2 | usm]} {sec-level [noauth | authnopriv | authpriv]}
{read-view [hex <hex value> | <view name>] { write-view [hex <hex value> |
<view name>] {notify-view [hex <hex value> | <view name>]} {volatile}
Description
Create (and modify) a group and its access rights.
Syntax Description
hex
group name
sec-model
snmpv1
snmpv2
usm
sec-level
noauth
authnopriv
authpriv
read-view
write-view
notify-view
volatile
Default
The default values are:
• sec-model—USM
• sec-level—noauth
• read view name—defaultUserView
• write view name— ""
• notify view name—defaultUserView
• non-volatile storage
Usage Guidelines
Use this command to configure access rights for a group. All access groups are created with a unique
default context, "", as that is the only supported context.
There are a number of default (permanent) groups already defined. These groups are: admin, initial,
initialmd5, initialsha, initialmd5Priv, initialshaPriv, v1v2c_ro, v1v2c_rw.
142
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the group name to add or modify.
Specifies the security model to use.
Specifies the SNMPv1 security model.
Specifies the SNMPv2c security model.
Specifies the SNMPv3 User-based Security Model (USM).
Specifies the security level for the group.
Specifies no authentication (and implies no privacy) for the security level.
Specifies authentication and no privacy for the security level.
Specifies authentication and privacy for the security level.
Specifies the read view name.
Specifies the write view name.
Specifies the notify view name.
Specifies volatile storage.
ExtremeWare 7.5 Command Reference Guide