Configure Snmpv3 Add Community - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

configure snmpv3 add community

configure snmpv3 add community {hex <hex value>} <community index> name
{hex <hex value>} <community name> user {hex <hex value>} <user name> {tag
{hex <hex value>} <transport tag>} {volatile}
Description
Add an SNMPv3 community entry.
Syntax Description
hex
community index
community name
user name
transport tag
volatile
Default
N/A.
Usage Guidelines
Use this command to create or modify an SMMPv3 community in the community MIB.
Example
Use the following command to create an entry with the community index comm_index, community
name comm_public, and user (security) name v1v2c_user:
configure snmpv3 add community comm_index name comm_public user v1v2c_user
Use the following command to create an entry with the community index (hex) of 4:E, community name
(hex) of EA:12:CD:CF:AB:11:3C, user (security) name v1v2c_user, using transport tag 34872 and
storage:
configure snmpv3 add community hex 4:E name hex EA:12:CD:CF:AB:11:3C user v1v2c_user
tag 34872 volatile
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
144
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the row index in the snmpCommunityTable
Specifies the community name.
Specifies the USM user name.
Specifies the tag used to locate transport endpoints in SnmpTargetAddrTable.
When this community entry is used to authenticate v1/v2c messages, this tag
is used to verify the authenticity of the remote entity.
Specifies volatile storage.
volatile
ExtremeWare 7.5 Command Reference Guide