Set Pwa Banner - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.6.6

set pwa banner

Use this command to configure a string to be displayed as the PWA login banner.
set pwa banner string
Syntax Description
string
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA login banner to "Welcome to Enterasys Networks":
Matrix(rw)->set pwa banner "Welcome to Enterasys Networks"
Configuring Port Web Authentication (PWA)
Specifies the PWA login banner.
Matrix NSA Series Configuration Guide
Security Configuration Command Set
14-61