Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Table 14-3 show pwa Output Details (Continued)
Output
Mode
Auth Status
Quiet Period
MaxReq
14-56 Matrix NSA Series Configuration Guide
What It Displays...
PWA port control mode.
Whether or not the port state is disconnected, authenticating
authenticated, or held (authentication has failed).
Amount of time a port will be in the held state after a user
unsuccessfully attempts to log on to the network. Default
value of 60 can be changed using the set pwa quietperiod
command as described in
Maximum number of log on attempts allowed before
transitioning the port to a held state. Default value of 2 can
be changed using the set pwa maxrequests command as
described in
Section
Section
14.3.6.18.
14.3.6.19.