Show Ip Igmp Snooping; Show Mac-Address-Table Multicast - Enterasys Matrix-V V2H124-24 Configuration Manual

show ip igmp snooping

Use this command to show the IGMP snooping configuration.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See "Layer 2 IGMP (Snooping and Query)" on page 2-74 for a description of
the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
Service status:
Querier status:
Query count:
Query interval:
Query max response time:
Query time-out:
IGMP snooping version:
Console#

show mac-address-table multicast

Use this command to show known multicast addresses.
Syntax
show mac-address-table multicast [vlan vlan-id] [user | igmp-snooping]
• vlan-id - VLAN ID (1 to 4094)
• user - Display only the user-configured multicast entries.
• igmp-snooping - Display only entries learned through IGMP snooping.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on selected
options.
Enabled
Enabled
2
125 sec
10 sec
300 sec
Version 2
Multicast Filtering Commands
4
4-227