Show Tacacs - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.4.1

show tacacs

Use this command to display the current TACACS+ configuration information and status.
show tacacs [state]
Syntax Description
state
Command Defaults
If state is not specified, all TACACS+ configuration information will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display all TACACS configuration information:
Matrix(ro)->show tacacs
TACACS+ state:
TACACS+ session accounting state:
TACACS+ command authorization state:
TACACS+ command accounting state:
TACACS+ single-connect state:
TACACS+ service:
TACACS+ session authorization A-V pairs:
access level attribute
read-only
read-write
super-user
TACACS+ Server
--------------
1
Table 14-2
(Optional) Displays only the TACACS+ client status.
'priv-lvl'
'priv-lvl'
'priv-lvl'
IP Address
---------------
10.1.26.245
provides an explanation of the command output.
enabled
disabled
disabled
disabled
disabled
exec
Port Timeout
----- -------
49 10
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring TACACS+
value
'0'
'1'
'15'
Status
-------
Active
14-25