Set Pwa Initialize - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Port Web Authentication (PWA)

14.3.6.17 set pwa initialize

Use this command to initialize a PWA port to its default unauthenticated state.
set pwa initialize [port-string]
Syntax Description
port-string
Command Type
Switch command.
Command Defaults
If port-string is not specified, all ports will be initialized.
Command Mode
Read-Write.
Example
This example shows how to initialize ports fe.1.5-7:
Matrix(rw)->set pwa initialize fe.1.5-7
14-72 Matrix NSA Series Configuration Guide
(Optional) Initializes specific port(s). For a detailed
description of possible port-string values, refer to
Section 4.1.1.