Set Pwa Redirecttime - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14.3.6.9

set pwa redirecttime

Use this command to set the PWA login success page redirect time.
set pwa redirecttime time
Syntax Description
time
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the PWA redirect time to 10 seconds:
Matrix(rw)->set pwa redirecttime 10
14-64 Matrix NSA Series Configuration Guide
Specifies the number of seconds before the user will be
redirected to the PWA home page after successful login.
Valid values are 0 - 120.