Set Pwa Gueststatus - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.6.16 set pwa gueststatus

Use this command to enable or disable guest networking for port web authentication. When
enhanced mode is enabled (as described in
guest user name to grant network access with default policy privileges to users without established
login names and passwords.
set pwa gueststatus {authnone | authradius | disable}
Syntax Description
authnone
authradius
disable
Command Type
Switch command.
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable PWA guest networking with RADIUS authentication:
Matrix(rw)->set pwa guestnetworking authradius
Configuring Port Web Authentication (PWA)
Section 14.3.6.12), PWA will use a guest password and
Enables guest networking with no authentication method.
Enables guest networking with RADIUS authentication.
Upon successful authentication from RADIUS, PWA will
apply the policy returned from RADIUS to the PWA port.
Disables guest networking.
Matrix NSA Series Configuration Guide
Security Configuration Command Set
14-71