Show Macauthentication Session - Enterasys N Standalone (NSA) Series Configuration Manual

Security Configuration Command Set
Configuring MAC Authentication
14.3.7.2

show macauthentication session

Use this command to display the active MAC authenticated sessions.
show macauthentication session
Syntax Description
None.
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If port-string is not specified, MAC session information will be displayed for all
MAC authentication ports.
Example
This example shows how to display MAC session information:
Matrix(rw)->show macauthentication session
Port MAC Address
----- -----------------
ge.1.2 00:60:97:b5:4c:07
Table 14-5 provides an explanation of the command output.
Table 14-5 show macauthentication session Output Details
Output
Port
MAC Address
Duration
14-82 Matrix NSA Series Configuration Guide
Duration Reauth Period
---------- -------------
0,00:52:31 3600
What It Displays...
Port designation. For a detailed description of possible
port-string values, refer to
MAC address associated with the session.
Time this session has been active.
Reauthentications
-----------------
disabled
Section 4.1.1.