Show Tacacs Command - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.4.9

show tacacs command

Use this command to display the status (enabled or disabled) of TACACS+ accounting or
authorization on a per-command basis.
show tacacs command {accounting | authorization} [state]
Syntax Description
accounting
authorization
state
Command Defaults
If state is not specified, all accounting or authorization configuration parameters
are displayed (which at this time includes only the enabled/disabled status).
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to display the state of the TACACS+ client's command authorization.
Matrix(rw)->show tacacs command authorization
TACACS+ command authorization state:
Display the status of TACACS+ accounting on a
per-command basis.
Display the status of TACACS+ authorization on a
per-command basis.
(Optional) Specifies that only the status should be
displayed.
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring TACACS+
enabled
14-35