Connecting To The Console Port For Local Management; What Is Needed; Figure 2-26 08A-Rps-500 Rps Cable And Ac Power Cord Connections - Enterasys 08H20G4-24 Hardware Installation Manual

Connecting to the Console Port for Local Management

Figure 2-26
800-Series switch
1
RPS cable (1 meter long)
2
08A-RPS-500 output connector
3
800-Series redundant power supply
4
connector

Connecting to the Console Port for Local Management

This section describes how to install an RS232 DTE interface cable to a PC, a VT series terminal, or
a modem to the 800-Series for out-of-band sessions using CLI commands.

What Is Needed

An optional console cable (08A-CON-CBL) is required if you want to locally manage the switch
via the front panel RJ45 console port. The cable is terminated by an RJ45 connector at one end and
by a DB9 female connector at the other end.
Using an RJ45-to-DB9 female cable, you can connect products equipped with a RJ45 console port
to an IBM or compatible PC running a VT series emulation software package.
2-32 Installation
08A-RPS-500 RPS Cable and AC Power Cord Connections
AC power cord (type varies depending on country)
5
AC power outlet with ground connection (type
6
varies depending on country)