Set System Baud - Enterasys Matrix E1 1G694-13 Configuration Manual

Startup and General Configuration
Setting Basic System Information
3.2.2.9

set system baud

Use this command to set the console port baud rate.
set system baud rate
Syntax Description
rate
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the system baud rate to 19200:
Matrix>set system baud 19200
System console port baud rate set to 19200.
3-20 Matrix E1 Series (1G694-13) Configuration Guide
Specifies the console baud rate. Valid rates are 9600, 19200,
2400, 4800 and 38400.