Show Ip Mvif - Allied Telesis x510-28GTX Command Reference Manual

M C
ULTICAST OMMANDS

SHOW IP MVIF

show ip mvif
Overview Use this command to display the contents of the IPv4 Multicast Routing
Information Base (MRIB) VIF table.
show ip mvif <interface>
Syntax
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 32-6: Example output from the show ip mvif command
Interface Vif
Idx
vlan2 0
Register 1
vlan3 2

Figure 32-7: Example output from the show ip mvif command with the
Interface Vif
Idx
vlan2 0
C613-50170-01 Rev B
Parameter Description
<interface>
The interface to display information about.
show ip mvif vlan2
Owner TTL Local
Module Address
PIM-SM 1 192.168.1.53
1 192.168.1.53
PIM-SM 1 192.168.10.53
interface parameter vlan2 specified
Owner TTL Local
Module Address
PIM-SM 1 192.168.1.53
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Remote Uptime
Address
0.0.0.0 00:04:26
0.0.0.0 00:04:26
0.0.0.0 00:04:25
Remote Uptime
Address
0.0.0.0 00:05:17
1312