NEC Univerge SV8100 Features And Specifications Manual page 218

Issue 1.0
Program
Program Name
Number
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DDI/
DIL/ E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-35 Class of Service Options
(Supplementary Service) – Block
Camp-On
20-18-06 Service Tone Timers – Interval of
Call Waiting Tone
2 - 194
Description/Comments
Turns Off (0) or On (1) the
extension ability to receive a
second call from a DID, DISA, DIL,
or tie line caller.
With this option set to 1, the
destination extension must be
busy for a second DNIS caller
to ring through. If the
destination extension does not
have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless of
this program setting.
Turns Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy.
Turns On (1) or Off (0) the ability of
an extension to receive Off-Hook
Signals.
Allows a busy extension ability to
Manually (0) or Automatically (1)
receive off-hook signals.
Use this option to Turns On (1) or
Off (0) extension ability to block
#
callers from dialing to camp-on.
Use this option to set the interval
between call waiting tones. This
timer also sets the interval between
Off-Hook signaling alerts.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10 seconds)
Call Waiting/Camp-On
Level
2 3