NEC Univerge SV8100 Features And Specifications Manual page 246

Issue 1.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
10-03-XX ETU Setup
11-11-13 Service Code Setup (for Setup/
Entry Operation) – Display
Language Selection for Multiline
Terminal
11-12-30 Service Code Setup (for Service
Access) – Specified Trunk
Answer
14-01-02 Basic Trunk Data Setup –
Transmit Level
14-01-03 Basic Trunk Data Setup –
Receive Level
14-02-02 Analog Trunk Data Setup – Ring
Detect Type
2 - 222
Description/Comments
Use program 10-03-XX to setup
and confirm the basic configuration
data for each blade. This program
represents different data depending
on the blade installed in the slot.
Please refer the SV8100
Programming Manual for a more
detailed description of this program.
Select the service code which can
be used at an extension to change
the displayed language on a
multiline terminal display.
If required, redefine the service
code used to answer a specific
trunk which is either ringing or on
hold.
Customize the transmit and receive
levels of the CODEC Gain Types for
each trunk.
Customize the transmit and receive
levels of the CODEC Gain Types for
each trunk.
This option sets Extended Ring
Detect or Immediate Ring Detect for
the trunk. For T1 loop/ground start
trunks, this option must be set to 1
for the trunks to ring and light
correctly.
UNIVERGE SV8100
Assigned Data
1
The assigned data
varies depending on
the blade installed in
the slot. Please refer
to the SV8100
Programming Manual
for a more detailed
description of the
10-03-XX programs.
MLT
(default = 678)
MLT, SLT
(default = 672)
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in
0.5dB intervals)
[default = 32 (0dB)]
Trunks 1~200
1~63
(-15.5 ~ +15.5dB in
0.5dB intervals)
[default = 32 (0dB)]
Trunks 1~200
0 = Normal/delayed
1 = Immediate Ringing
(default = 1)
Central Office Calls, Answering
Level
2 3