NEC Univerge SV8100 Features And Specifications Manual page 250

Issue 1.0
Program
Program Name
Number
21-01-17 System Options for Outgoing
Calls – Restriction Digit in
Outgoing Disable on Incoming
Line
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
22-01-02 System Options for Incoming
Calls – Incoming Call Ring No
Answer Alarm
22-01-03 System Options for Incoming
Calls – Ring No Answer Alarm
Time
22-01-04 System Options for Incoming
Calls – DIL No Answer Recall
Time
22-02-01 Incoming Call Trunk Setup
22-03-01 Trunk Ring Tone Range – Ring
Tone Pattern
2 - 226
Description/Comments
With the Outgoing Disable on
Incoming Line feature, determine
the number of digits (0~9) to be
dialed before the call should be
disconnected.
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both are
ringing simultaneously.
Enable (1) or Disable (0) the
Incoming Call RNA Alarm. If
enabled, the ring cadence will
change for a call that rings longer
than the interval set in Program
22-01-03.
Set the Ring No Answer Alarm
interval. If a trunk rings a multiline
terminal longer than this interval,
the system changes the ring
cadence.
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
Use this option to set the feature
type for the trunk you are
programming.
Assign Ring Tone Ranges to trunks.
Trunks ring extensions according to
the Ring Tone Range selected in
Program 22-03-0 and the settings
made with either Service Code 720
or Program 15-02-02.
UNIVERGE SV8100
Assigned Data
1
Digits 0~9
(default = 4)
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0~64800 (seconds)
(default = 60 seconds)
0~64800 (seconds)
(default = 0 seconds)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
0~8
(Ring Tone Pattern
1~4)
(Melody 1~ Melody 5)
(default = 0)
Central Office Calls, Answering
Level
2 3