NEC Univerge SV8100 Features And Specifications Manual page 268

Issue 1.0
Program
Program Name
Number
20-08-11 Class of Service Options
(Outgoing Call Service) – Protect
for the Call Mode Switching from
Caller
20-08-12 Class of Service Options
(Outgoing Call Service) –
Department Group Step Calling
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
20-08-14 Class of Service Options
(Outgoing Call Service) – Call
Address Information
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E000 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
2 - 244
Description/Comments
When an extension is set to ring
mode for ICM calls, enabling this
option prevents callers from
changing the call to voice announce
mode.
Turns Off or On an extension user
ability to use Department Group
Step Calling.
Determine if the ISDN calling line
identity presentation and screening
indicators are to be allowed.
Use to Enable or Disable Call
Address Information for each Class
of Service.
Turns Off (0) or On (1) a user Class
of Service from automatically
blocking outgoing Caller ID
information when a call is placed. If
block is enabled, the system
automatically inserts the Caller ID
block code 1831 (defined in
Program 14-01-21) before the user
dialed digits (this requires Program
14-02-10 to be enabled). If block is
disabled, the system outdials the
call just as it was dialed by the user.
Turns Off or On an extension ability
to display the name and number of
the extension that dialed 000.
Turns Off or On an extension user
ability to override the trunk access
map programming for outgoing
calls.
Turns Off or On an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
Turns On (1) or Off (0) the ability of
an extension to make a call by just
dialing the number without first
going off hook.
Used to Enable or Disable the
ability to access trunks when going
off hook by pressing the speaker
key for each Class of Service.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Class of Service
Level
2 3