NEC Univerge SV8100 Features And Specifications Manual page 227

UNIVERGE SV8100
Related Features
UM8000 Mail
VM8000 InMail
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
14-01-22 Basic Trunk Data Setup – Caller
ID to Voice Mail
14-02-10 Analog Trunk Data Setup – Caller
ID
15-02-04 Multiline Telephone Basic Data
Setup – Redial (Speed Dial)
Control
Operation
None
SV8100 Features and Specifications Manual
Description/Comments
Enable (1) or Disable (0) the system
ability to send the Caller ID digits to
voice mail.
Enable or Disable a trunk to receive
Caller ID information.
Use this option to control the
function of the extension Redial key
when used with Speed Dialing. The
Redial key can access either the
Common or Group Speed Dialing
numbers.
Assigned Data
1
Trunks 1~200
0 = Disable
1 = Enable
(default = 0)
Trunks 1~200
0 = Disable
1 = Enable
(default = 1)
0 = Common and
Individual Speed
Dialing
1 = Group Speed
Dialing
(default = 0)
Issue 1.0
Level
2 3
2 - 203