NEC Univerge SV8100 Features And Specifications Manual page 252

Issue 1.0
Program
Program Name
Number
82-08-01 Sidetone Volume Setup
Operation
To answer an incoming trunk call:
1. Lift the handset.
To use Universal Answer to answer a call ringing over the Paging system:
1. Go off-hook.
Depending on system programming, this may answer the call and you can skip Step 2.
2. Dial 0.
#
If you hear error tone, your extension Class of Service prevents Universal Answer.
To listen to the incoming trunk ring choices:
1. Press Speaker.
2. Dial 711 + 2.
3. Select the ringing (1~8) and tone range (1~4) you want to check.
4. Go back to step 3 to listen to additional choices or press Speaker to hang up.
To change the ringing of your incoming trunk:
1. Press Speaker.
2. Dial 720 + 2.
3. Select the ringing (1~8).
4. Press Speaker to hang up.
2 - 228
Description/Comments
Use this program to adjust of the
multiline terminal side tone volume.
There are two levels, based on
whether the connected trunk is a
digital trunk or analog trunk.
UNIVERGE SV8100
Assigned Data
1
Input (0 ~ 9)
Digital Sidetone Level
(second column)
Analog Sidetone Level
(third column)
0 -54 (dB) -54 (dB)
1 -48 (dB) -54 (dB)
2 -42 (dB) -54 (dB)
3 -36 (dB) -48 (dB)
4 -30 (dB) -42 (dB)
5 -24 (dB) -36 (dB)
6 -18 (dB) -30 (dB)
7 -12 (dB) -24 (dB)
8 -12 (dB) -18 (dB)
9 -12 (dB) -12 (dB)
Central Office Calls, Answering
Level
2 3