Table of Contents
Advertisement
Cable Reel
Replacement
@
store a removed airbag with the pad sur-
tac€ up. lf the airbag is improperly stored face down,
. c c i d o n t a l d c p l o y m e n t c o u l d p r o p e l t h e u n i t w i t h
.nough torce to cause serious injury.
CAUTIONT
o Carefully insp€ct the airbag belore installing it. Do
not install an airbag that shows signs of boing
dropped or improperly handled, such as dents,
cracks or deformation.
. Always disconnect the airbag connector(s) when the
harness is disconnectod.
. Do not disassemble or tamper wiih the airbag.
1.
Make sure you have the anti-theft code for the radio,
then write down the frequencies for the radio's pr+
set button.
2.
Disconnect the battery negative cable, then discon-
nect the positive cable from the battery. and wait at
least three minutes,
3.
Remove the access panel from the steering wheel,
then disconnect the 2P connector between the driv'
er's airbag and cable reel.
NOTE: When disconnected. the airbag connector is
automaticallv shoned.
DRIVER'S AIRBAG
2P CONNECTOR
ORIVER'S AIRSAG
ASSEMELY
CABLE REEL
2P CONNECTOR
23-322
4,
Make sure the wheels are aligned straight ahead.
5.
Remove the dashboard lower cover and knee bol-
ster.
TORX BOLTS
Use e Torx T30 bit.
DASHBOARD
LOWER COVER
Remove the two Torx bolts from the steering wheel,
then remove the driver's airbag.
Advertisement
Table of Contents
Troubleshooting
