Table of Contents
Advertisement
Instsll the steering wheel bolt, then install the driv-
er's airbag.
TORX BOLTS
9.8 N m {1.0 kgf'm,7.2 lbtftl
R e p l a c e .
U3e . Torx T30 bit.
STEERING WHEEL NUT
19 N.m (5 kgl.m, 36 lbl.ftl
Anach the 2P and 3P connectors to the connector
holder. then install the knee bolster and dashboard
lowgr cover,
l e
CONNECTOR HOLDER
DASHBOARD LOWER COVER
23-325
\
'19. Reconnect the driver's aibag 2P connector to the
cable reel 2P connector, and reinstSll the access
panel on the steering wheel.
20, Reconnect the battery positive cable, then the nega-
tivs cable.
21. After installing the cable reel, confirm proper sys-
tgm operation:
Turn the ignition switch ON (ll); the SRS indica-
tor light should come on for about six seconds
and thsn go off.
Make surs both horn buttons work.
M a k e s u r e t h e h e a d l i g h t a n d w i p e r s w i t c h e s
Go {or a test drive, and make sure the cruise con-
trol switches work.
Ent6r the anti-theft code for tho radio, then enter the
customsr's radio station presets.
a
a
Advertisement
Table of Contents
Troubleshooting
