Acura Integra 1998 Service Manual page 1378

Integra 1998

Hide thumbs Also See for Integra 1998:

Table of Contents

Replacement (cont'dl

. Before installing the steering wheel, the lront

wheels should be aligned str8ight ahead.

. Be sure to install the harness wires so that they

are not pinched or interfering with other parts.

. After reassembly, confirm thal the wheels are

slill turned str8ight ahead and that the steering

wheel spoke angle is correst (road test). lf minol

spoke angle adjustment is necessary, do so only

by adiusting the tie-.ods, not by removing and

repositioning the steering wheel.

12. Align the cancel sleeve grooves with the cable reel

projections.

Carefully install the cable reel on the steering column

s h a f t . T h e n c o n n e c t t h e 2 P c o n n e c t o r t o t h e S R S

main harness, and connect the 3P connector to the

main wire harness.

CANCELS SLEEVE

Install the steering column covers.

lf necessary, center the cable reei. (New replace-

ment cable reels come centered.) Do this by first

rotating the cable reel clockwise until it stops. Then

rotate it counterclockwise (approximately two and a

half turns) untll the arrow mark on the cable reel

label points straight up.

I n s t a l l t h e s t e e r i n g w h e e l , t h e n c o n n e c t t h e h o r n

connector and cruise control sevtesume switch con-

CRUISE CONTROL

HORN CONNECTOR

Troubleshooting