Default-Information Originate - Dell Z9500 Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.2(0.2)
9.0.2.0
8.3.19.0
8.3.12.0
6.3.1.0

default-information originate

Generates a default route into an IS-IS routing domain and controls the distribution of default
information.
Z9500
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
To disable the generation of a default route into the specified IS-IS routing domain,
use the no default-information originate [always] [metric metric]
[route-map map-name] command.
Parameters
always
metric metric
route-map
map-name
Defaults Not configured.
Command
•
Modes
•
Intermediate System to Intermediate System (IS-IS)
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced.
(OPTIONAL) Enter the keyword always to have the default
route always advertised.
(OPTIONAL) Enter the keyword metric then a number to
assign to the route. The range is from 0 to 16777215.
(OPTIONAL) A default route the routing process generates if
the route map is satisfied.
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
1035