Showing Counters; Using The Ap Manager; Using The Access Point 2000 Console Port; Using The Roamabout R2 Console Port - Enterasys 802.11 Networking Manual

Showing Counters

You can display the values of all the counters maintained by the AP. This information can
help you monitor the performance of your wireless network or better understand a problem.
Typically, this information is used by RoamAbout support personnel to help you diagnose
a problem.

Using the AP Manager

Perform the following to show a subset of the counters using the AP Manager. For a
description of the counters, click the Help button.
1. Select the AP from the Managed List field.
2. Click the Counters button.

Using the Access Point 2000 Console Port

To show all the counters using the console port:
1. Choose Module-Specific Options from the RoamAbout AP Installation Menu.
2. Choose Show Counters. The first screen displays counters with information specific
to the Ethernet interface. The second screen displays the same counters with
information specific to the wireless interface. The subsequent screens display a subset
of the counters with information specific to wireless ports 1 through 6. The counters
are described in
which are described in

Using the RoamAbout R2 Console Port

To show counters using the console port, choose Counters from the Main Menu. You can
display the counters for the wired or wireless interface. The same set of counters is used for
both ports. The counters and their descriptions are listed in
Table 7-9. The final screen shows the RoamAbout PC Card counters,
Table 7-10 on page 7-14.
Table 7-11 on page

Showing Counters

7-17.
7-11