Selection
Startup Configuration
TFTP Download
6.2
CHANGING THE NETWORK CONFIGURATION
Use the Network Configuration Menu screen
•
Access the screens needed to set the bootup option.
•
Configure the switch's Internet Protocol (IP) parameters.
•
Enable the on-board Web Agent.
•
Set the number of concurrent Telnet sessions allowed.
The screen shown below is described in the following table.
Figure 6-2 Network Configuration Menu Screen
Description
Used to disable the extended system diagnostics during
system bootup routine for faster bootups. For details, refer to
Section
6.6.
Downloads new version of firmware to update your system
(in-band). For details, refer to
(Figure
6-2) for any of the following:
Management Setup Menu Screens
Changing the Network Configuration
Section
6.7.
6-3