Factory Defaults - Enterasys 5G1XX Local Management User’s Manual

You should assign a new administrator password, record it and put it in a safe place for future
reference.
To assign a new password, start at the Main Menu, select Management Setup Menu /Console
Login Configuration, and enter a new password for the administrator. Passwords can consist of up
to 11 alphanumeric characters and are not case sensitive.
NOTE: A user is allowed three attempts to enter the correct password; on the third
failed attempt, the current connection is terminated.
3.4

FACTORY DEFAULTS

Table 3-1 lists the default settings for switch configuration parameters. Each parameter can be
changed via the console menus or Telnet.
Table 3-1 Factory Default Settings
Parameter
Multicast Filtering
IGMP Multicast Filtering
Port Configuration
Speed and Duplex
Admin
Port Priority
Default Ingress User Priority
Default Value
Disabled
Auto
Enabled
0
Accessing Local Management
Factory Defaults
3-5