Inter-Release Compatibility - AT&T MERLIN LEGEND Release 2.0 System Programming Manual

Programming with SPM
Display
Step
The DEBUG attribute is also specified in ams.cfg as DEBUG=0 (off), the default
setting, or DEBUG=1 (on). This attribute is used to enable the Escape to Shell
feature of SPM, activated by the
the initialization process — to turn DEBUG on, you must edit the ams.cfg file.
The DEBUG attribute is for use by qualified service personnel only.

Inter-Release Compatibility

It is important to understand compatibilities between files created on each of the
different versions of SPM and the different feature modules of the
communications system, not only for upgrading, but also for programming.
Table 2-3 summarizes programming compatibility. (It is assumed that the
majority of the programming is done in surrogate mode and backed up on disk.)
Instructions
Type 1, 2, or 3 to select a language. The
language you choose becomes the SPM
(PC) language.
Review your selections and type y to
change any of the information on the
screen or n to save the initialization
information. y takes you back to the
screen shown in Step 3. n takes you to the
screen shown in Step 8.
You see the SPM Main Menu, indicating
that the SPM program is ready to use.
[ Ctrl ] + [ F9 ]
key sequence.. It is not part of
Inter-Release Compatibility
2-37