AT&T MERLIN LEGEND Release 2.0 System Programming Manual page 586

Programming Procedures
Display/Instructions
Step
6. To assign Allowed List to
barrier code and assign
Allowed List to another
barrier code:
If next barrier code
is sequential
Your previous entry is
saved and next barrier
code number is shown
on line 1.
If next barrier code
number is not
sequential
To save your entry when all
entries are complete
To return to System
Programming menu
On the console
Select Next.
Repeat number 4
in Step 5c.
Select Enter and then
select Exit.
Repeat Steps 4 and 5c.
Select Enter.
Select Exit
three times.
Remote Access with Barrier Codes
On the PC
[F9]
Press
Repeat number 4
in Step 5c.
[F10]
Press and then
[F5].
press
Repeat Steps 4 and 5c.
[F10]
Press
[ F 5 ]
Press
three times.
3-495